fcntl - 操作文件描述符
#include <unistd.h> #include <fcntl.h> int fcntl(int fd, int cmd); int fcntl(int fd, int cmd, long arg); int fcntl(int fd, int cmd, struct flock *lock);
fcntl() 執行下述就開文件描述符fd的操作之一。該操作是由 cmd 確定。
標簽 | 描述 |
---|---|
F_DUPFD |
Find the lowest numbered available file descriptor greater than or equal to arg and make it be a copy of fd. This is different fromdup2(2) which uses exactly the descriptor specified.
On success, the new descriptor is returned. See dup(2) for further details. |
The following commands manipulate the flags associated with a file descriptor. Currently, only one such flag is defined: FD_CLOEXEC, the close-on-exec flag. If theFD_CLOEXEC bit is 0, the file descriptor will remain open across an execve(2), otherwise it will be closed.
標簽 | 描述 |
---|---|
F_GETFD | Read the file descriptor flags. |
F_SETFD | Set the file descriptor flags to the value specified by arg. |
Each open file description has certain associated status flags, initialized by open(2) and possibly modified by fcntl(2). Duplicated file descriptors (made with dup(),fcntl(F_DUPFD), fork(), etc.) refer to the same open file description, and thus share the same file status flags.
The file status flags and their semantics are described in open(2).
標簽 | 描述 |
---|---|
F_GETFL | Read the file status flags. |
F_SETFL | Set the file status flags to the value specified by arg. File access mode (O_RDONLY, O_WRONLY, O_RDWR) and file creation flags (i.e., O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC) in argare ignored. On Linux this command can only change theO_APPEND, O_ASYNC, O_DIRECT, O_NOATIME, andO_NONBLOCK flags. |
F_GETLK, F_SETLK and F_SETLKW are used to acquire, release, and test for the existence of record locks (also known as file-segment or file-region locks). The third argument lock is a pointer to a structure that has at least the following fields (in unspecified order).
struct flock { ... short l_type; /* Type of lock: F_RDLCK, F_WRLCK, F_UNLCK */ short l_whence; /* How to interpret l_start: SEEK_SET, SEEK_CUR, SEEK_END */ off_t l_start; /* Starting offset for lock */ off_t l_len; /* Number of bytes to lock */ pid_t l_pid; /* PID of process blocking our lock (F_GETLK only) */ ... };
The l_whence, l_start, and l_len fields of this structure specify the range of bytes we wish to lock. l_start is the starting offset for the lock, and is interpreted relative to either: the start of the file (if l_whence is SEEK_SET); the current file offset (if l_whenceis SEEK_CUR); or the end of the file (if l_whence is SEEK_END). In the final two cases,l_start can be a negative number provided the offset does not lie before the start of the file. l_len is a non-negative integer (but see the NOTES below) specifying the number of bytes to be locked. Bytes past the end of the file may be locked, but not bytes before the start of the file. Specifying 0 for l_len has the special meaning: lock all bytes starting at the location specified by l_whence and l_start through to the end of file, no matter how large the file grows.
The l_type field can be used to place a read (F_RDLCK) or a write (F_WRLCK) lock on a file. Any number of processes may hold a read lock (shared lock) on a file region, but only one process may hold a write lock (exclusive lock). An exclusive lock excludes all other locks, both shared and exclusive. A single process can hold only one type of lock on a file region; if a new lock is applied to an already-locked region, then the existing lock is converted to the new lock type. (Such conversions may involve splitting, shrinking, or coalescing with an existing lock if the byte range specified by the new lock does not precisely coincide with the range of the existing lock.)
標簽 | 描述 |
---|---|
F_SETLK | Acquire a lock (when l_type is F_RDLCK or F_WRLCK) or release a lock (when l_type is F_UNLCK) on the bytes specified by the l_whence, l_start, and l_len fields of lock. If a conflicting lock is held by another process, this call returns -1 and setserrno to EACCES or EAGAIN. |
F_SETLKW | As for F_SETLK, but if a conflicting lock is held on the file, then wait for that lock to be released. If a signal is caught while waiting, then the call is interrupted and (after the signal handler has returned) returns immediately (with return value -1 anderrno set to EINTR). |
F_GETLK | On input to this call, lock describes a lock we would like to place on the file. If the lock could be placed, fcntl() does not actually place it, but returns F_UNLCK in the l_type field of lock and leaves the other fields of the structure unchanged. If one or more incompatible locks would prevent this lock being placed, then fcntl() returns details about one of these locks in thel_type, l_whence, l_start, and l_len fields of lock and sets l_pid to be the PID of the process holding that lock. |
In order to place a read lock, fd must be open for reading. In order to place a write lock,fd must be open for writing. To place both types of lock, open a file read-write.
As well as being removed by an explicit F_UNLCK, record locks are automatically released when the process terminates or if it closes any file descriptor referring to a file on which locks are held. This is bad: it means that a process can lose the locks on a file like /etc/passwd or /etc/mtab when for some reason a library function decides to open, read and close it.
Record locks are not inherited by a child created via fork(2), but are preserved across an execve(2).
Because of the buffering performed by the stdio(3) library, the use of record locking with routines in that package should be avoided; use read(2) and write(2) instead.
Advisory locks are not enforced and are useful only between cooperating processes.
Mandatory locks are enforced for all processes. If a process tries to perform an incompatible access (e.g., read(2) or write(2)) on a file region that has an incompatible mandatory lock, then the result depends upon whether the O_NONBLOCK flag is enabled for its open file description. If the O_NONBLOCK flag is not enabled, then system call is blocked until the lock is removed or converted to a mode that is compatible with the access. If the O_NONBLOCK flag is enabled, then the system call fails with the error EAGAIN or EWOULDBLOCK.
To make use of mandatory locks, mandatory locking must be enabled both on the file system that contains the file to be locked, and on the file itself. Mandatory locking is enabled on a file system using the "-o mand" option to mount(8), or theMS_MANDLOCK flag for mount(2). Mandatory locking is enabled on a file by disabling group execute permission on the file and enabling the set-group-ID permission bit (seechmod(1) and chmod(2)).
F_GETOWN, F_SETOWN, F_GETSIG and F_SETSIG are used to manage I/O availability signals:
標簽 | 描述 |
---|---|
F_GETOWN | Get the process ID or process group currently receiving SIGIO and SIGURG signals for events on file descriptor fd. Process IDs are returned as positive values; process group IDs are returned as negative values (but see BUGS below). |
F_SETOWN |
Set the process ID or process group ID that will receive SIGIO and SIGURG signals for events on file descriptor fd. A process ID is specified as a positive value; a process group ID is specified as a negative value. Most commonly, the calling process specifies itself as the owner (that is, arg is specified asgetpid()).
If you set the O_ASYNC status flag on a file descriptor (either by providing this flag with the open(2) call, or by using theF_SETFL command of fcntl()), a SIGIO signal is sent whenever input or output becomes possible on that file descriptor.F_SETSIG can be used to obtain delivery of a signal other than SIGIO. If this permission check fails, then the signal is silently discarded. Sending a signal to the owner process (group) specified byF_SETOWN is subject to the same permissions checks as are described for kill(2), where the sending process is the one that employs F_SETOWN (but see BUGS below). If the file descriptor fd refers to a socket, F_SETOWN also selects the recipient of SIGURG signals that are delivered when out-of-band data arrives on that socket. (SIGURG is sent in any situation where select(2) would report the socket as having an "exceptional condition".) If a non-zero value is given to F_SETSIG in a multi-threaded process running with a threading library that supports thread groups (e.g., NPTL), then a positive value given to F_SETOWNhas a different meaning: instead of being a process ID identifying a whole process, it is a thread ID identifying a specific thread within a process. Consequently, it may be necessary to pass F_SETOWN the result of gettid() instead ofgetpid() to get sensible results when F_SETSIG is used. (In current Linux threading implementations, a main thread’s thread ID is the same as its process ID. This means that a single-threaded program can equally use gettid() or getpid() in this scenario.) Note, however, that the statements in this paragraph do not apply to the SIGURG signal generated for out-of-band data on a socket: this signal is always sent to either a process or a process group, depending on the value given toF_SETOWN. Note also that Linux imposes a limit on the number of real-time signals that may be queued to a process (seegetrlimit(2) and signal(7)) and if this limit is reached, then the kernel reverts to delivering SIGIO, and this signal is delivered to the entire process rather than to a specific thread. |
F_GETSIG | Get the signal sent when input or output becomes possible. A value of zero means SIGIO is sent. Any other value (including SIGIO) is the signal sent instead, and in this case additional info is available to the signal handler if installed with SA_SIGINFO. |
F_SETSIG |
Sets the signal sent when input or output becomes possible. A value of zero means to send the default SIGIO signal. Any other value (including SIGIO) is the signal to send instead, and in this case additional info is available to the signal handler if installed with SA_SIGINFO.
Additionally, passing a non-zero value to F_SETSIG changes the signal recipient from a whole process to a specific thread within a process. See the description of F_SETOWN for more details. By using F_SETSIG with a non-zero value, and setting SA_SIGINFO for the signal handler (see sigaction(2)), extra information about I/O events is passed to the handler in asiginfo_t structure. If the si_code field indicates the source is SI_SIGIO, the si_fd field gives the file descriptor associated with the event. Otherwise, there is no indication which file descriptors are pending, and you should use the usual mechanisms (select(2), poll(2), read(2) with O_NONBLOCK set etc.) to determine which file descriptors are available for I/O. By selecting a real time signal (value >= SIGRTMIN), multiple I/O events may be queued using the same signal numbers. (Queuing is dependent on available memory). Extra information is available if SA_SIGINFO is set for the signal handler, as above. |
Using these mechanisms, a program can implement fully asynchronous I/O without using select(2) or poll(2) most of the time.
The use of O_ASYNC, F_GETOWN, F_SETOWN is specific to BSD and Linux. F_GETSIGand F_SETSIG are Linux-specific. POSIX has asynchronous I/O and the aio_sigeventstructure to achieve similar things; these are also available in Linux as part of the GNU C Library (Glibc).
標簽 | 描述 | ||||||||
---|---|---|---|---|---|---|---|---|---|
F_SETLEASE |
Set or remove a file lease according to which of the following values is specified in the integer arg:
|
||||||||
A process may hold only one type of lease on a file. | |||||||||
Leases may only be taken out on regular files. An unprivileged process may only take out a lease on a file whose UID matches the file system UID of the process. A process with the CAP_LEASE capability may take out leases on arbitrary files. | |||||||||
F_GETLEASE | Indicates what type of lease we hold on the file referred to by fdby returning either F_RDLCK, F_WRLCK, or F_UNLCK,indicating, respectively, that the calling process holds a read, a write, or no lease on the file. (The third argument to fcntl() is omitted.) |
When a process (the "lease breaker") performs an open() or truncate() that conflicts with a lease established via F_SETLEASE, the system call is blocked by the kernel and the kernel notifies the lease holder by sending it a signal (SIGIO by default). The lease holder should respond to receipt of this signal by doing whatever cleanup is required in preparation for the file to be accessed by another process (e.g., flushing cached buffers) and then either remove or downgrade its lease. A lease is removed by performing anF_SETLEASE command specifying arg as F_UNLCK. If we currently hold a write lease on the file, and the lease breaker is opening the file for reading, then it is sufficient to downgrade the lease to a read lease. This is done by performing an F_SETLEASEcommand specifying arg as F_RDLCK.
If the lease holder fails to downgrade or remove the lease within the number of seconds specified in /proc/sys/fs/lease-break-time then the kernel forcibly removes or downgrades the lease holder’s lease.
Once the lease has been voluntarily or forcibly removed or downgraded, and assuming the lease breaker has not unblocked its system call, the kernel permits the lease breaker’s system call to proceed.
If the lease breaker’s blocked open() or truncate() is interrupted b