鍍金池/ 教程/ Linux/ nanosleep()函數 Unix/Linux
outb()函數 Unix/Linux
getpeername()函數 Unix/Linux
io_setup()函數 Unix/Linux
mknod()函數 Unix/Linux
arch_prctl()函數 Unix/Linux
inotify_add_watch()函數 Unix/Linux
chmod()函數 Unix/Linux
_exit()函數 Unix/Linux
epoll_ctl()函數 Unix/Linux
Unix/Linux系統調用
futimesat()函數 Unix/Linux
oldolduname()函數 Unix/Linux
sched_rr_get_interval()函數 Unix/Linux
oldstat()函數 Unix/Linux
pselect()函數 Unix/Linux
close()函數 Unix/Linux
add_key()函數 Unix/Linux
clone()函數 Unix/Linux
rename()函數 Unix/Linux
msgop()函數 Unix/Linux
getrlimit()函數 Unix/Linux
linkat()函數 Unix/Linux
ioprio_set()函數 Unix/Linux
insw()函數 Unix/Linux
munlock()函數 Unix/Linux
getgid()函數 Unix/Linux
chdir()函數 Unix/Linux
rmdir()函數 Unix/Linux
ioctl()函數 Unix/Linux
lchown()函數 Unix/Linux
execve()函數 Unix/Linux
epoll_wait()函數 Unix/Linux
fstatat()函數 Unix/Linux
truncate()函數 Unix/Linux
lock()函數 Unix/Linux
outsb()函數 Unix/Linux
chroot()函數 Unix/Linux
kexec_load()函數 Unix/Linux
afs_syscall()函數 Unix/Linux
dup2()函數 Unix/Linux
_newselect()函數 Unix/Linux
inotify_rm_watch()函數 Unix/Linux
recv()函數 Unix/Linux
msgsnd()函數 Unix/Linux
getdtablesize()函數 Unix/Linux
ioperm()函數 Unix/Linux
munmap()函數 Unix/Linux
getpriority()函數 Unix/Linux
sched_get_priority_min()函數 Unix/Linux
outw_p()函數 Unix/Linux
kill()函數 Unix/Linux
lookup_dcookie()函數 Unix/Linux
accept()函數 Unix/Linux
obsolete()函數 Unix/Linux
pread()函數 Unix/Linux
getgroups()函數 Unix/Linux
personality()函數 Unix/Linux
recvfrom()函數 Unix/Linux
putpmsg()函數 Unix/Linux
getgroups()函數 Unix/Linux
remap_file_pages()函數 Unix/Linux
request_key()函數 Unix/Linux
mount()函數 Unix/Linux
sched_setscheduler()函數 Unix/Linux
mkdirat()函數 Unix/Linux
nfsservctl()函數 Unix/Linux
getuid()函數 Unix/Linux
prof()函數 Unix/Linux
exit_group函數 Unix/Linux
io_cancel()函數 Unix/Linux
mmap()函數 Unix/Linux
mremap()函數 Unix/Linux
getitimer()函數 Unix/Linux
unimplemented()函數 Unix/Linux
read()函數 Unix/Linux
inl()函數 Unix/Linux
posix_fadvise()函數 Unix/Linux
open()函數 Unix/Linux
listen()函數 Unix/Linux
io_destroy()函數 Unix/Linux
acct()函數 Unix/Linux
fcntl()函數 Unix/Linux
recvmsg()函數 Unix/Linux
statfs()函數 Unix/Linux
oldlstat()函數 Unix/Linux
outb()函數 Unix/Linux
getpagesize()函數 Unix/Linux
sched_yield()函數 Unix/Linux
outw()函數 Unix/Linux
inw_p()函數 Unix/Linux
setpgid()函數 Unix/Linux
quotactl()函數 Unix/Linux
prctl()函數 Unix/Linux
fattach()函數 Unix/Linux
readahead()函數 Unix/Linux
msgget()函數 Unix/Linux
gethostname()函數 Unix/Linux
semctl()函數 Unix/Linux
munlockall()函數 Unix/Linux
iopl()函數 Unix/Linux
fdetach()函數 Unix/Linux
getuid()函數 Unix/Linux
gettid()函數 Unix/Linux
pwrite()函數 Unix/Linux
isastream()函數 Unix/Linux
get_thread_area()函數 Unix/Linux
mpx()函數 Unix/Linux
io_getevents()函數 Unix/Linux
lstat()函數 Unix/Linux
readv()函數 Unix/Linux
exit()函數 Unix/Linux
inw()函數 Unix/Linux
fchmod()函數 Unix/Linux
mq_getsetattr()函數 Unix/Linux
get_robust_list()函數 Unix/Linux
_llseek()函數 Unix/Linux
gettimeofday()函數 Unix/Linux
nice()函數 Unix/Linux
security()函數 Unix/Linux
sched_get_priority_max()函數 Unix/Linux
outb_p()函數 Unix/Linux
intro()函數 Unix/Linux
alarm()函數 Unix/Linux
putmsg()函數 Unix/Linux
fork()函數 Unix/Linux
getpgrp()函數 Unix/Linux
link()函數 Unix/Linux
getcwd()函數 Unix/Linux
insl()函數 Unix/Linux
getsockname()函數 Unix/Linux
dup()函數 Unix/Linux
connect()函數 Unix/Linux
select()函數 Unix/Linux
futex()函數 Unix/Linux
outsw()函數 Unix/Linux
query_module()函數 Unix/Linux
reboot()函數 Unix/Linux
create_module()函數 Unix/Linux
adjtimex()函數 Unix/Linux
mlock()函數 Unix/Linux
statvfs()函數 Unix/Linux
gtty()函數 Unix/Linux
epoll_create()函數 Unix/Linux
bind()函數 Unix/Linux
inl_p()函數 Unix/Linux
select_tut()函數 Unix/Linux
mincore()函數 Unix/Linux
getresuid()函數 Unix/Linux
getpmsg()函數 Unix/Linux
getcontext()函數 Unix/Linux
killpg()函數 Unix/Linux
olduname()函數 Unix/Linux
openat()函數 Unix/Linux
pause()函數 Unix/Linux
alloc_hugepages()函數 Unix/Linux
ioctl_list()函數 Unix/Linux
readlinkat()函數 Unix/Linux
mprotect()函數 Unix/Linux
getdomainname()函數 Unix/Linux
readlink()函數 Unix/Linux
madvise()函數 Unix/Linux
bdflush()函數 Unix/Linux
ipc()函數 Unix/Linux
ptrace()函數 Unix/Linux
getrusage()函數 Unix/Linux
msync()函數 Unix/Linux
faccessat()函數 Unix/Linux
modify_ldt()函數 Unix/Linux
get_kernel_syms()函數 Unix/Linux
getpid()函數 Unix/Linux
fsync()函數 Unix/Linux
msgctl()函數 Unix/Linux
break未實現 Unix/Linux
sched_setparam()函數 Unix/Linux
fchown()函數 Unix/Linux
cacheflush()函數 Unix/Linux
fdatasync()函數 Unix/Linux
flock()函數 Unix/Linux
pivot_root()函數 Unix/Linux
inotify_init()函數 Unix/Linux
fchmodat()函數 Unix/Linux
keyctl()函數 Unix/Linux
llseek()函數 Unix/Linux
outb()函數 Unix/Linux
pipe()函數 Unix/Linux
io_submit()函數 Unix/Linux
ppoll()函數 Unix/Linux
multiplexer()函數 Unix/Linux
access()函數 Unix/Linux
sched_getparam()函數 Unix/Linux
chown()函數 Unix/Linux
readdir()函數 Unix/Linux
inb_p()函數 Unix/Linux
outsl()函數 Unix/Linux
nanosleep()函數 Unix/Linux
alloc_hugepages()函數 Unix/Linux
sbrk()函數 Unix/Linux
move_pages()函數 Unix/Linux
fchdir()函數 Unix/Linux
renameat()函數 Unix/Linux
getppid()函數 Unix/Linux
getsid()函數 Unix/Linux
oldfstat()函數 Unix/Linux
lseek()函數 Unix/Linux
stat()函數 Unix/Linux
path_resolution()函數 Unix/Linux
getunwind()函數 Unix/Linux
getsockopt()函數 Unix/Linux
mmap2()函數 Unix/Linux
getdents()函數 Unix/Linux
fchownat()函數 Unix/Linux
mkdir()函數 Unix/Linux
perfmonctl()函數 Unix/Linux
open()函數 Unix/Linux
idle()函數 Unix/Linux
poll()函數 Unix/Linux
brk()函數 Unix/Linux
sched_setaffinity()函數 Unix/Linux
mlockall()函數 Unix/Linux

nanosleep()函數 Unix/Linux

nanosleep - 暫停執行，在指定的時間

內容簡介

#define _POSIX_C_SOURCE 199309 #include <time.h>

int nanosleep(const struct timespec *req, struct timespec *rem);

DESCRIPTION

nanosleep() delays the execution of the program for at least the time specified in *req. The function can return earlier if a signal has been delivered to the process. In this case, it returns -1, sets errno to EINTR, and writes the remaining time into the structure pointed to by rem unless rem is NULL. The value of *rem can then be used to callnanosleep() again and complete the specified pause.

The structure timespec is used to specify intervals of time with nanosecond precision. It is specified in <time.h> and has the form

struct timespec {
    time_t tv_sec;        /* seconds */
    long   tv_nsec;       /* nanoseconds */
};

The value of the nanoseconds field must be in the range 0 to 999999999.

Compared to sleep(3) and usleep(3), nanosleep() has the advantage of not affecting any signals, it is standardized by POSIX, it provides higher timing resolution, and it allows to continue a sleep that has been interrupted by a signal more easily.

返回值

On successfully sleeping for the requested interval, nanosleep() returns 0. If the call is interrupted by a signal handler or encounters an error, then it returns -1, with errno set to indicate the error.

錯誤

標簽 描述
EFAULT 問題從用戶空間復制信息。
EINTR The pause has been interrupted by a non-blocked signal that was delivered to the process. The remaining sleep time has been written into *rem so that the process can easily callnanosleep() again and continue with the pause.
EINVAL The value in the tv_nsec field was not in the range 0 to 999999999 or tv_sec was negative.

BUGS

The current implementation of nanosleep() is based on the normal kernel timer mechanism, which has a resolution of 1/HZ s (see time(7)). Therefore, nanosleep() pauses always for at least the specified time, however it can take up to 10 ms longer than specified until the process becomes runnable again. For the same reason, the value returned in case of a delivered signal in *rem is usually rounded to the next larger multiple of 1/HZ s.

Old behaviour

In order to support applications requiring much more precise pauses (e.g., in order to control some time-critical hardware), nanosleep() would handle pauses of up to 2 ms by busy waiting with microsecond precision when called from a process scheduled under a real-time policy like SCHED_FIFO or SCHED_RR. This special extension was removed in kernel 2.5.39, hence is still present in current 2.4 kernels, but not in 2.6 kernels.

In Linux 2.4, if nanosleep() is stopped by a signal (e.g., SIGTSTP), then the call fails with the error EINTR after the process is resumed by a SIGCONT signal. If the system call is subsequently restarted, then the time that the process spent in the stopped state isnot counted against the sleep interval.

遵循于

POSIX.1-2001.

另請參閱